top of page
hand pump.jpg

Hand Pump

Hand pumps in the PH series are available with 70 or 80 MPa working pressure and with the choice of 600 or 1000 cm3 effective oil capacity. The pumps with 70 MPa working pressure can also be supplied with a pre-assembled 2 meter long hydraulic hose (LS201ES), swivel coupling (ASE10) and quick coupling (AQI7). The names of these kits are PH70A-600/LS201 and PH70A-1000/LS201 respectively.

  • High oil flow

  • Limited pump effort required

  • Aluminium oil reservoir

  • Cast iron pump housing

  • User friendly

  • Simple service

  • Robust and reliable

Petroleum pump.jpg

Petrol Pump

Hydraulic petrol-driven pumps with a high oil flow rate. Petrol-driven pumps are a good alternative when you need a mobile pump that does not require an external power source, for example on building sites or shipyards.

Motor: 1 cylinder, 4-stroke, 1,8 kW

MLS model is suitable for operation with single acting tool.
MLD model is suitable for operation with double acting tools.

  • Double-speed pumps with automatic switching between low and high pressure.

  • Supplied with protective frame and rubber feet.

  • Open design for effective cooling during operation.

  • Can be equipped with hose reel and other accessories.

Air Pump.jpg

Air Pump

PPxx-1000 air/hydraulic pumps are very compact pumps that work in any position, horizontally or vertically, thanks to a rubber bladder built into the tank. The pumps can easily be operated by hand or foot.

  • High oil flow.

  • Easy to fill up and check oil level.

  • Over pressure safety valve prevents overfilling of the tank during release operation - minimises risk of injury.

  • Return oil line can easily be connected to oil reservoir filler hole.

  • Reliable and service friendly.

Pumps with suffix /LS201, /LS250, /LS301 and /LSS203 are complete kits with hose and couplings - ready to be used instantly.

Electrical pump.jpg

Electrical Pump

The pumps are well suited for applications where a stationary pump unit is required. All pumps in the PME series have a two-stage operation with automatic switching between high and low pressure at 2 MPa - 6 MPa depending on the pump type. The low-pressure unit is a gear pump that gives a high flow up to the switching pressure. The high-pressure unit is a single or double-piston pump.

bottom of page