Easy to operate 
The hydraulic spring compressor is equipped with a quick-coupling which makes it easy to connect the tool to a foot-operated air/hydraulic pump (this type of pump is highly recommended). Thanks to the pump, the operator has both hands free for controlling the tool. Furthermore, the spring compressor is provided with a flexible holding block, which allows the tool to be placed in a suitable angle in a work bench vise.

Time saving 
The hydraulic spring compressor is a time saving tool because compression and decompression is done very quickly. Besides that, in many cases the tool can be used directly on the car.

Using REHOBOT's 18 ton capacity lightweight aluminium hollow bore cylinder and the comprehensive set of accessories contained within the kits the equipment can be easily used on any vehicle and give the following major benefits.

All models of HGV catered for safe, simple and speedy hands free process. Up to 60% time and labour cost saving on traditional methods. The lightweight and compact design allows work to be carried out on the vehicle even where access is restricted. Little or no manual effort is required. All work carried out in-situ on the vehicle. Total weight of 8 kg's fully assembled falls well within EU manual handling of loads regulations. Can be easily and cheaply upgraded should new vehicle types be introduced onto the market.

The ETC pin and bushing extraction tool kits have been developed in conjunction with the major manufacturers of heavy plant and special purpose machines for the construction industry.

Safe, simple hands free operation

Up to 60% time and labour saving

Can be adapted to suit all makes of construction plant and heavy equipment

Flexible and adaptable

Improved health and safety compared to traditional methods

Recommended for both workshop owners, mechanics and vehicle owners

Suitable for both work shop and on site repairs

Using the lightweight high-tensile aluminium hollow bore cylinder together with the unique stacking C-sleeve system and comprehensive sets of accessories incorporated in these kits, the equipment can easily be used on many makes of machines.

Hydraulic pullers are designed for tough industrial applications and are available in sizes from 5 to 44 ton.

The rugged design will make this a workhorse for many years to come.

The benefits of a hydraulic puller, compared with a mechanical one, are many; the most important is a non rotating piston / press head. This allows the user to carry out the pull safely without the risk of slipping.

• Rugged design.

• Safe and stable pull operations as piston is non rotating.

• Self aligning.

The smaller sizes, 5 ton and 10 ton, are equipped with special mechanics which self centers the arms.

For powerful and versatile performance
The EBH hydraulic tool kit is used for a wide variety of applications in car and truck workshops worldwide. Working with the EBH to replace bushings, axles and bearings is easy and saves time.

Once you have become familiar with the system and how to use it, you will find it very easy to adapt it to many other applications where performing difficult operations in less time is important.

​

EBH does the job on the spot In many cases the amount of strip-down preparation is reduced and the need to take the part to a workshop press eliminated. Instead you can work with the hydraulic tool kit directly on the vehicle.

The hydraulic ball joint extractor has a substantially longer life time than comparable mechanical tools. Because it is being operated together with a hydraulic pump with a safety valve which prevents the tool from overloading.

Light and portable
The light and handy hydraulic ball joint extractor is provided with a swiveling quick-coupling, which makes it easy to attach the tool to a hydraulic pump and prepares the tool for being used directly on the vehicle.

Easy to use
When the hydraulic ball joint extractor is attached to a foot-operated air/hydraulic pump, the operator is able to handle the tool in a controlled way with both hands.